Advertisement
HOW TO USE THE UNICOUPLE
Before operating your dishwasher the first time...
Attach the Faucet Adapter. The special faucet adapter
supplied with your dishwasher must be assembled to the
sink faucet before you can use your dishwasher.
The faucet adapter is designed to fit standard spouts
having internal or external threads. You will find the
adapter and two washers in the "Faucet Adapter"
packet in your dishwasher.
To install faucet adapter, first remove
the old aerator or trim ring on your faucet spout.
If faucet has internal threads:
Insertboth washers into the
faucet adapter and attach it
to the faucet spout.
If the faucet adapter threads
do not match your faucet spout,
!!!?
your local hardware or plumbing
supply store normally has additional fittings to
adapt your faucet spout to the special faucet adapter.
If faucet has external threads:
'-
NOTE: A sink spray attachment hose can burst ifit
Insert the timer
of the two
is installed on the same sink with your dishwashe~
washers into the faucet adapter
We suggest that
you
disconnect the sink spray
and attach it to the faucet spout.
attachment lfyour sink has one and plug the hole.
f!!!!)
How to comect the Unicouple
1. Pull Unicouple and its hoses completely out from
storage compartment located at rear of dishwasher
and attach it to the faucet adapter.
2. Attach the Unicouple
comector to the
faucet adapter by
depressing collar
at the top of the
p&
connector. When
-
!
..
~ ~,,.,
..:,
Unicouple is all
,. %
';..
the way up onto
the adapter, release
the collar. It will then
snap into position to lock the Unicouple in place.
The Unicouple's small hose carries water from
the faucet to the dishwasher. Its large hose carries
drain watty to the sink. Be sure Unicouple is
pointing toward the sink bowl drain opening and
the sink drain is open for water that will drain from
your dishwasher. If your dishwasher drains into a
disposer, operate the disposer until it is completely
empty before starting the dishwasher.
3. Turn hot water filly on before starting the dishwasher.
How to use the Faucet-Flo nozzle
T'heFaucet-No nozzle is
For example:
part of the
Unicoupleconnector.
Operate the nozzle
by
depressing
It allows you to flush the
the pressure release button on the
cold water out of the hot
front of the
Unimple
connector.
water line so that you can better
You will fmd the Faucet-Flo
regulate your water temperature.
nozzle
useful for severalreasons.
It allows you to test the
temperature of the water
before starting your dishwasher.
Advertisement
