Assemble Your Device - Samsung Galaxy Tab S2 User Manual

Assemble Your Device

This section helps you to
assemble your device.
Install an Optional Memory Card
You can install an optional microSD
microSDHC memory card (not included) to add
™
additional memory space to your device.
Note: A memory card can be installed at any time; it
is not necessary to install it prior to using the device.
1. Open the memory card slot cover and turn to
expose the slot.
2. With the gold contacts facing down, carefully
slide the memory card into the slot, pushing
gently until it clicks into place.
3. Close the memory card slot cover.
Getting Started
™ or
4
Charge the Battery
Your device is powered by a rechargeable, standard
Li-Ion battery. A USB charger (charging head and
USB cable) is included with the device for charging
the battery from any standard outlet.
The battery comes partially charged. A fully
discharged battery requires up to four hours of
charge time. You can use the device while charging.
Note: It is recommended you fully charge the battery
before using your device for the first time.
Caution: Use only charging devices and batteries
approved by Samsung. Samsung accessories are
designed for your device to maximize battery life.
Using other accessories may invalidate your warranty
and may cause damage.
1. Insert the USB cable into the port.
2. Connect the USB cable to the charging head,
and then plug the charging head into a standard
outlet.
3. Unplug the charging head from the outlet and
remove the USB cable from the device when
charging is complete.
Assemble Your Device