Service Devices; Product Specific Devices; Rm-495; - Nokia 5130 Service Manual

RM-495; RM-496
Service Devices and Service Concepts

Service devices

Product specific devices

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-495; RM-496. For the correct use of the service devices, and the best effort of workbench
setup, please refer to various concepts.
Issue 1
FS-108
• FS-108 is equipped with a clip interlock system
• provides standardised interface towards Control Unit
• provides RF connection using coupler
• multiplexing between USB and FBUS media, controlled by VUSB
MJ-215
MJ-215 is meant for component level troubleshooting.
The jig includes an RF interface for GSM and Bluetooth. In addition, it
has the following features:
• Provides mechanical interface with the engine module
• Provides galvanic connection to all needed test pads in module
• Multiplexing between USB and FBUS media, controlled by Vusb
• MMC interface
• Duplicated SIM connector
• Connector for control unit
• Access for AV- and USB connectors
RJ-230
RJ-230 is a jig used for soldering and as a rework jig for the engine
module.
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Flash adapter
Module jig
Common jig
Page 2 –5