Samsung GT-C5130 Service Manual page 87

Disassembly and Assembly Instructions
5
1) Assemble SLIDE LOWER by pressing 3 points from
the bottom.
7
1) Attach SLIDE FPCB to lower.
2) Check the FPCB is correctly inserted
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Slide down and Drive screws at 4 points with
touque 1.3 +/- 0.1gf/ ㎠
8
1) IInsert FPCB of SUB PBA to Main PBA . Make sure
that FPCB is completely inserted.
11-6