Samsung GT-C5130 Service Manual page 84

9
1) Disassemble side of Front locking partl. (2 points)
2) Detach SLIDE FPCB from lower.by pincette
*Caution!
Be careful to not to tear the Slide FPCB.
11
1) Remove green tape and then you can disassemble
Slide FPCB.
*Caution!
Be careful about conductive tape.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
10
1) Pull the LOWER by lifting it from bottom to top.
and remove from Front ass'y.
*Caution! Be careful to not to tear the Slide FPCB.
12
1) Open FPCB connecter and disassemble Slide FPCB.
2) Open FPCB connecter and disassemble receiver.
11-3