Advertisement
This product should be used only in accordance with the specifications outlined in this manual.
Usage other than what has been specified here may result in serious injury.
WARNING: THE CORDS, WIRES, AND/OR CABLES SUPPLIED WITH THIS PRODUCT
CONTAIN CHEMICALS, INCLUDING LEAD OR LEAD COMPOUNDS, kNOWN TO THE
STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM, WASH HANDS AFTER USING.
•
Disassembly, repair or remodeling by an unauthorized person may result in serious harm.
•
Do not use if plug is damaged or loose.
•
Keep this product out of the reach of children and pets.
•
Be careful not to put water in the humidity spout.
•
Before filling or cleaning the unit, make sure it is unplugged.
•
Once the humidifier has been turned on, do not move it.
•
Do not remove the water tank from the unit while it is on.
•
Do not handle the plug with wet hands.
•
Do not excessively bend, twist or pull the power cord.
•
Avoid placing this product where the humidity spout is pointed directly at an object.
•
Do not inhale the humidity spout.
•
Do not place this product on a sloped or unstable surface.
•
When not in use, unplug the unit.
•
Do not fill the water tank with hot or boiling water.
•
Do not use this product in direct sunlight or near a gas stove or heater.
•
If the water tank becomes cracked or damaged do not use.
•
Do not keep this product running for an extended period of time.
•
Do not clean the unit of water tank with detergents or chemicals of any kind.
•
Do not use this product near any other electronic device.
•
Do not cover the humidity opening at any time during use.
•
Do not use this product near a sink.
•
Do not drink water from tank.
•
Do not place this product on an absorbent surface.
Failure to comply with the warnings listed above may result in electric shock or serious injury.
Make sure the unit is unplugged.
1. Separate the tank from the
body of the unit.
2. Open the tank lid, turning
it to the left.
3. Pour cool, clean water directly
into the tank.
5. Attach the tank to the body
of the unit and plug in.
7. Turn the Humidity Dial to the
desired volume of humidity.
Toward the right and the humidity
level increases; toward the left
and the humidity level decreases.
(Continued)
4. Close the tank lid, turning it
to the right.
6. Turn the Mode Dial to either
cool or warm. The Power LED
light up.
8. As soon as the Refill LED lights
up, turn the unit off and refill the
water tank.
E-5
Advertisement
