Alpine CDA-9853R Service Manual page 40

No. Symbol
66 LCD CLK
67 LCD CS1 A
68 LCD A0 A
69 LCD DI A
70 LCD RESET
71 AVdd
72 AVss
73 AVref
74 NC
75 SR1
76 SR2
77 SR3
78 SR4
79 SR5
80 SR6
81 SR7
82 KEY-IN1
83 KEY-IN2
84 KEY-IN3
85 NC
86 NMI(PULL-UP)
87 NC
88 F-START
89 NC
90 ACTION IND
91 SLIDER CONT
92 NC
93 RED-LED
94
NC
95
96 RGB RST
97 RGB CS
98 RGB DATA
99 RGB CLK
100 ENCODER-2
I/O
O Clock signal output terminal to LCD DRIVER.
O CE signal output terminal to LCD DRIVER.
O Address bus selection signal output terminal to LCD DRIVER.
O Serial data output terminal to LCD DRIVER.
O Reset output terminal to LCD DRIVER.
- Power supply terminal for A/D converter.
- GND terminal for A/D converter.
I Reference voltage input terminal for A/D converter.
- No connect terminal.
I Touch Sensor input terminal of SLIDER.
I Click input terminal of SLIDER.
I A/D converter input terminal.
- No connect terminal.
- Pull-up connect terminal.
- No connect terminal.
I Communication frame input terminal from Main u-COM.
- No connect terminal.
O ACTION IND CONT output terminal.
O SLIDER-LED control terminal.
- No connect terminal.
O RGB circumference light control terminal.
- No connect terminal.
O RGB RESET output terminal.
O RGB Chip Select output terminal.
O RGB serial data output terminal.
O RGB serial clock output terminal.
I ENCODER input terminal.
- 40 -
Terminal Description
TO SCHEMATIC
CDA-9853R
TO CONTENTS