SERTEL T-GPS-300 User Manual page 13

On completion of the installation, the application can be accessed from the START MENU.
[Start Menu -> All Programs -> Sertel NTPClient 1.2]
[To uninstall the software, go to Add/Remove Programs in the Control Panel, and then uninstall
the "SertelNTPClient 1.2" software.]
[NOTE: Admin Privileges is required to both install and run the software on the target system.]
RUNNING THE Sertel NTPClient 1.2:
1. Open the NTPClient from the start menu (Start -> All Programs -> Sertel NTPClient 1.2).
2. In order to change the IP Address of the NTP server, click "Configure" button in the
application and enter the new IP address of the Sertel NTP Server (IP of Sertel's hardware
unit).