Chevrolet Volt 2017 Owner's Manual page 22

Hide thumbs Also See for Volt 2017:
Table of Contents

Advertisement

Charging
Start Charge
A portable charge cord used to
charge the vehicle high voltage
battery is stored in the left storage
compartment in the rear cargo area.
1. Place the vehicle in P (Park)
with the ignition off.
2. Push the rearward edge of the
charge port door in and release
to open the door.
In cold weather conditions, ice
may form around the charge
port door. Remove ice from the
area before attempting to open
or close the charge port door.
3. Open the rear hatch. Open the
left storage compartment door
and remove the charge cord.
The vehicle plug is stored as
shown.
4. Plug the charge cord into the
electrical outlet. See Electrical
Requirements for Battery
Charging 0 229. Verify the
charge cord status. See
Charge Cord 0 222. Select the
appropriate charge level using
the Charge Limit Preference
screen on the center stack.
See Charge Limit Selection
under Programmable
Charging 0 119.
In Brief
5. Plug in the vehicle plug of the
charge cord into the charge
port on the vehicle. Verify that
the charging status indicator
illuminates on top of the
instrument panel and an
audible beep occurs. See
Charging Status
Feedback 0 217.
6. To arm the charge cord theft
alert, lock the vehicle with the
RKE transmitter. To disable this
feature, see Charge Cord
Theft Alert in Vehicle
Personalization 0 141.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Volt 2018

Table of Contents