Philips 43PUH4900 User Manual page 43

Brightness
With Brightness, you can set the level of brightness
of the picture signal. Brightness is a setting intended
for expert users. We recommend non-expert users to
adjust the brightness of the picture with
the Contrast setting.
To adjust the level...
1. Press  and select Setup and press OK.
2. Select TV
settings > Picture > Advanced > Contrast >
Brightness.
3. Press  (right) and adjust the value with
or  (down).
4. Press  , repeatedly if necessary, to close the
menu.
Video contrast
With Video Contrast, you can decrease the range of
the video contrast.
To adjust the level...
1. Press  and select Setup and press OK.
2. Select TV
settings > Picture > Advanced >
Contrast > Video contrast.
3. Press  (right) and adjust the value with
or  (down).
4. Press  , repeatedly if necessary, to close the
menu.
Gamma
With Gamma, you can set a non-linear setting for
picture luminance and contrast. Gamma is a setting
intended for expert users.
To adjust the level...
1. Press  and select Setup and press OK.
2. Select TV
settings > Picture > Advanced > Contrast >
Gamma.
3. Press  (right) and adjust the value with
or  (down).
4. Press  , repeatedly if necessary, to close the
menu.
Sharpness settings
Ultra resolution
With Ultra resolution, you switch on a superior
sharpness in line edges and contours.
To switch on or off...
1. Press  and select Setup and press OK.
2. Select TV
settings > Picture > Advanced >
Sharpness > Ultra resolution.
3. Select On or Off.
4. Press  , repeatedly if necessary, to close the
menu.
Noise reduction
With Noise reduction, you can filter out and reduce
the level of image noise.
 (up)
To adjust the noise reduction...
1. Press  and select Setup and press OK.
2. Select TV
settings > Picture > Advanced >
Sharpness > Noise reduction.
3. Select Maximum, Medium, Minimum or Off.
4. Press  , repeatedly if necessary, to close the
menu.
MPEG artefact reduction
With MPEG artefact reduction, you can smoothen
the digital transitions in the picture. MPEG artefacts
are mostly visible as small blocks or jagged edges in
images.
 (up)
To reduce the MPEG artefacts...
1. Press  and select Setup and press OK.
2. Select TV
settings > Picture > Advanced >
Sharpness > MPEG artefact reduction.
3. Select Maximum, Medium, Minimum or Off.
4. Press  , repeatedly if necessary, to close the
menu.
Format and edges
Picture format
If black bars appear on top and bottom or on both
sides of the picture, you can adjust the picture format
 (up)
to a format that fills the screen.
To change the picture format ...
1. Press  and select Setup and press OK.
2. Select TV settings > Picture > Format and
edges > Picture format.
3. Select a format from the list and press OK.
4. Press  , repeatedly if necessary, to close the
menu.
To change the picture format while watching TV ...
1. While watching a TV channel, press  to open
the Picture format menu.
43