Lenovo ThinkPad L560 User Manual page 117

Table 3. Security menu items (continued)
Menu item Submenu item
Password at Restart
Password at Boot
Device List
Password Count
Exceeded Error
Set Minimum Length
Power-On Password
Hard Disk
1Password
Value
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• x characters (4≤x≤12)
• Disabled
• Enabled
• Disabled
• Enabled
Comments
ahead and loads the operating system.
To prevent unauthorized access, set the
user authentication on the operating
system.
If you select and enable Password at
restart, a password prompt is displayed
when you restart the computer. If you
select Disabled, no password prompt
is displayed; the computer goes ahead
and loads the operating system. To
prevent unauthorized access, set the
user authentication on the operating
system.
If the Security password is set, this
option is used to specify whether the
Security password must be entered to
display the F12 boot device list.
Select Enabled to prompt for the
Security password.
Select Disabled to proceed without any
user action required.
Select Enabled to show the POST
0199 error and prompt for the Security
password.
Select Disabled to hide the POST 0199
error and proceed without any user
action required.
Specify a minimum length for power-on
passwords and hard disk passwords.
If you set the supervisor password
and specify a minimum length for
passwords, no one but you can change
the length.
For more information, see "Power-on
password" on page 41.
For more information, see "Hard disk
passwords" on page 43.
Note: Hard Disk 1 means the hard disk
drive is built into your computer.
.
Chapter 8 Advanced configuration
101