Advertisement
FLASH VAPORIZER – USER GUIDE
HOW TO USE:
The FlashVAPE™ is so easy to use, if you can count to 5, you know how to use the
FlashVAPE™.
This awsome vape is built for reliability and ease of use. You simple:
1. insert the battery, and turn on the main power switch,
2. fill the bowl half full,
3. press the power button for 1-2-3-4-5 seconds,
4. let go, and take your puff!
There is no waiting period, no warmup required, no hassles, its that simple! Then, when you
are ready to take your next puff, simply give the FlashVAPE a shake to redistribute the materials
evenly in the bowl, and press the power button again to repeat the 5 second process!
The FlashVAPE™ is built for vaping efficiency, it can be used with ORGANICS OR SOLIDS
CONCENTRATES!
The magic temperature for vaporization to occur is at between 190°C and 230°C (250°C for
solids), and this magic happens inside the FlashVAPE™ between the 4th and 5th second of
the power cycle. So when you press the power-on button on the FlashVAPE™, you control and
fine tune your prefered vaporizing temperature by controlling the amount of power-on time!
IMPORTANT TO KNOW:
-Only fill the bowl to maximum of half way to the top for best efficiently, as your materials need
room inside the vape chamber to move around when you shake it between each puff.
-Each half filled bowl should last approximately 10-15 puffs at 5 seconds of vape time each puff,
before most of the active ingredients are vaporized.
-A full charged battery will last a good 2-3 bowls before requiring a recharge. However, it is
recommended that batteries be charged after each bowl vaped.
-DO NOT press and hold the power button for more than 5 seconds as if left unchecked,
temperatures inside the vape chamber can get to well above 300°C.
-DO NOT inhale while the power button is pressed. Air flow will decrease the conduction and
convection effects of heat inside the vape chamber, and also the super heated air can be harsh
on your throat! Always wait for a one second period after releasing the power button before
inhaling.
-DO NOT allow the batteries to overheat. While using the unit, if any part of the unit becomes
too hot touch comfortably, stop and allow the unit to cool throughly before re-use.
Advertisement
Table of Contents
Related Manuals for FlashVAPE FlashVAPE
Summary of Contents for FlashVAPE FlashVAPE
- Page 1 FLASH VAPORIZER – USER GUIDE HOW TO USE: The FlashVAPE™ is so easy to use, if you can count to 5, you know how to use the FlashVAPE™. This awsome vape is built for reliability and ease of use. You simple: 1.
- Page 2 -DO NOT use any other battery in the FlashVAPE, other than the cells that came with your unit. The batteries that your FlashVAPE comes with are high quality specialty 18650 Lithium Ion (Li- Fe-Po4) batteries which are safer than traditional 18650 batteries, and runs on a lower voltage.
- Page 3 2) Hold your breath and repeat micro-hits until you are satisfied! With all advanced FlashVAPE methods the key is to maximize the amount of vapor being produced without reaching combustion. The factors that affect the power-on time...
- Page 4 FV that will let you know when you're approaching combustion temperatures. Through experimentation and practice, you too will soon develop your own preferred FlashVAPE method. Once you do, don’t forget to share with us on FC, and maybe we can name an advanced method after you too!
Need help?
Do you have a question about the FlashVAPE and is the answer not in the manual?
Questions and answers