Oki OKIJET 2500 User Manual page 48

5
Troubleshooting
Problem
Error LED is on.
Error LED is blinking.
Possible Meaning(s)
Printer is out of paper.
Printhead has not been correctly installed.
Carriage position error has occurred.
Paper feed error has occurred.
The optional high-capacity black printhead
is installed and color print is selected in the
Printer Driver Setup.
An internal printer fault has occurred.
Solution(s)
Add paper to the paper tray and press the Resume /FF
button.
Remove and reinstall the printhead.
1. Press the Resume /FF button to clear the error and eject
the paper.
2. Ensure that all packing material is removed.
If paper has misfed, remove the jammed paper. (Refer to
"Clearing Paper Misfeeds" earlier in this Section).
• For black only print, press and release the Resume/FF
button.
• For color printing, replace the high-capacity black
printhead with the color printhead.
Turn the printer off, then back on.
If the problem persists, unplug the printer from the outlet,
then plug it back in and turn it on.
If the problem still persists, contact your local service
dealer (see Section 7).
42