Philips DVP3355V/F7 Service Manual page 26

FLOW CHART NO.6
Audio is not outputted.
Set the disc on the disc tray, and playback.
Are the analog audio signals outputted to each pin
of CN1601?
CN1601 12PIN DVD-AUDIO(L)
CN1601 14PIN DVD-AUDIO(R)
Are the analog audio signals inputted to each pin
of IC1201.
IC1201 6PIN DVD-AUDIO(L)
IC1201 2PIN DVD-AUDIO(R)
Is the "H" level mute signals outputted to Pin(13) of
CN1601?
Are the analog audio signals outputted to each pin
of IC1201?
IC1201 7PIN DVD-AUDIO(L)
IC1201 1PIN DVD-AUDIO(R)
Are the audio signals outputted to the specific
output terminal?
Are the audio signals outputted to the L/R OUT
terminal (JK756)?
Are the audio signals outputted to the L/R OUT
terminal (JK751)?
Are the audio signals outputted to Pin(4,14) of
IC751?
Check the line between Pin(4,14) of IC751 and JK751,
and their periphery, and service it if defective.
Yes
Yes
Yes
Yes
Yes
No
Replace the DVD Main CBA Unit or the DVD
Mechanism.
Check each line between each pin of CN1601
and each pin of IC1201, and service
it if defective.
No
CN1601 12PIN → IC1201 6PIN DVD-AUDIO(L)
CN1601 14PIN → IC1201 2PIN DVD-AUDIO(R)
No
Replace the DVD Main CBA Unit.
No
Replace IC1201.
No
Check the periphery between Pins(1,7) of IC1201
and JK756, and service it if defective.
No
No
Are the "L" pulse inputted into Pin(9,10,11) of IC751?
Yes
Replace IC751.
1-10-6
No
Replace IC501.
E8E6DTR