Connections - B-52 ACTPRO12M Instruction Manual

ACTPRO
THE BEAUTY OF POWER

CONNECTIONS

EXAMPLE #5
This example shows the set-up of a pair of ACTPRO12M loudspeakers to be used as stage monitors. The
audio signal is provided by a mixer, a ProdigyFX in this example. Some mixers have a mono monitor
output but in this case you can daisy-chain a few ACTPRO12M speakers by connecting the INPUT of one
to the OUTPUT of another with an XLR cable.
Note: It is recommended to turn the LOW-CUT switch ON for better clarity in guitar and voice ranges
and avoid LF build-up on the stage.
Note: You can add the ACTPRO12M as a monitor to any of the previous examples (1 through 4) or to
any other set-up.
B-52 ACTPRO Active Systems - Instruction Manual
18