Teleste EOC03 Setup And Applications Manual

Teleste EOC03 Setup And Applications Manual

Ethernet over coax extender

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EOC03 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Teleste EOC03

  • Page 1 EOC03 Ethernet over Coax Extender Setup and applications guide Install and applications guide Sections Page What’s in the box Product overview Set up options Ethernet extension using existing Cable TV wiring Ethernet extension using existing DVB -T (TV aerial) cabling...
  • Page 2: What's In The Box

    What’s in the box? 1 x EOC03 Ethernet Extender 1 x PSU 1 x Ethernet Patch cord 1 x Coax fl y lead 1 x F to IEC adapter 1 x Quick start Guide...
  • Page 3: Product Overview

    Product overview Power (Red = on) Local ethernet connection Ethernet over coax Connection See page 7 for (Yellow = connected) more details on the meaning of the LED’s TV / CATV + Ethernet over Coax Signal INPUT TV ONLY OUTPUT to TV or Set top Box Gigabit Ethernet Port (does not carry Ethernet signal)
  • Page 4: Set Up Options

    Set up options The EOC03 on a Ethernet over coax bridge device. It can be used to deliver Gigabit Ethernet via a Coax (TV aerial or Cable TV) connection. It can be used as either a sender or receiver but will need to be used with at least one other Ethernet over Coax or MoCA compatible device.
  • Page 5: Ethernet Extension Using Existing Cable Tv Wiring

    It will however pass across the output connections of the distribution amplipher. At the 2nd EOC03 extender, connect the ‘CABLE IN’ socket to the wall outlet. Use the supplied COAX fl y lead to then remake the connection to the TV or set top box, so that the signal is passing through the EOC03.
  • Page 6: Ethernet Extension Using Existing Dvb -T (Tv Aerial) Cabling

    Ethernet over coax signal cannot pass through the amplifi er. At the 2nd EOC03 extender, connect the ‘CABLE IN’ socket to the wall outlet. Use the supplied COAX fl y lead to then make a connection to the TV or set top box, so that the signal is passing through the EOC03 to the TV or set top box.
  • Page 7 RED – EOC Ethernet port is connected to 100 Base T Ethernet device Note: These lights only indicate local connection status between the EOC03 and the set top box or games console and do not indicate that Gigabit or 100 Base T Ethernet is being...
  • Page 8 www.teleste.com...

Table of Contents