Filter Mode; Fx Mode - Native Instruments TRAKTOR KONTROL Z1 Manual

4.1.5

Filter Mode

With the FILTER mode enabled, the
Turning the knob clockwise cuts the low end frequencies, whereas turning counterclockwise
cuts the high end.
To operate the FILTER
►
4.1.6

FX Mode

The second function on the
Note that this FX Mode only applies when using the Z1 with TRAKTOR DJ!
Press MODE + ON
►
You will notice the
→
To engage the (internally selected) TRAKTOR DJ effect, press the
►
The ON button is engaged and fully illuminated orange.
→
TRAKTOR DJ has three banks of available effects, each of which contains eight effects.
Once a single effect is internally selected, the
rameter, or the amount of the effect applied.
The FILTER | FX
To control the Y parameter of the effect you can do so by touching it within TRAKTOR DJ.
You'll notice that the selected effect is altered in a different way when manually adjusted
this way.
When no FILTER
nated.
FILTER | FX
function, press the
FILTER | FX knob controls the
to switch to the corresponding FX mode.
ON button's dim backlighting switches from blue to orange.
knob controls the X axis of the XY pad of the selected TRAKTOR DJ effect.
or FX mode is required, press the
knob operates much like a standard filter.
ON button so it illuminates blue.
FX parameter of the Z1.
FILTER | FX knob will then control that pa-
ON button again so that it is not illumi-
TRAKTOR KONTROL Z1 - Manual - 18
Using the Z1 with TRAKTOR DJ
Key Z1 Functions Using TRAKTOR DJ
ON button again.