Philips 32PFL3403D/85 Service Manual page 14

EN 14 4. LC8.1U LA Mechanical Instructions
NOTE: For inverter cables,
the connector with ferrite
is to be inserted at the
PSU side
Figure 4-8 Cable dressing (52" models, MG8 styling)
Tape inverter cable so
it stays in-between the
LCD Panel lamp
holders as shown to
avoid EMC Foam on
SSB Bars.
Note horizontal orientation of wire saddle –
the IR and Speaker Cables must cross the
AC Mains Cable with "X" shape and not lay
in parallel
I_17741_015.eps
250408