Advertisement
In system mode you can do some device settings which are suitable only if you use more than one DS3 device on same computer !
Please use the factory reset function to get the right device settings for the enclosed traktor pro setup files.
Select midi channel for loop recorder
section within the choosen
midi channel group:
1 = 1st channel of the group (default)
2 = 2nd channel of the group
3 = 3rd channel of the group
4 = 4th channel of the group
Press both sync & play buttons
for factory reset
- System mode -
Press both Deck B & FX1 buttons
and hold for about 1 second
to enter/leave system mode
sys led is lit = system mode active
sys led blinks = controller isn't recognized
Select midi channel for browser section
within the choosen midi channel group:
1 = 1st channel of the group (default)
2 = 2nd channel of the group
3 = 3rd channel of the group
4 = 4th channel of the group
Select midi channel group:
1 = channel 1-4
2 = channel 5-8
3 = channel 9-12 (default)
4 = channel 13-16
1st channel of the group for deck A & FX1
2nd channel of the group for deck B & FX2
3rd channel of the group for deck C & FX3
4th channel of the group for deck D & FX4
Advertisement
