Advertisement
Introduction
Thank you for choosing a Faderfox controller. These probably world's smallest DJ-controllers are designed
for live use on stage. All Faderfox controllers are professionally manufactured in series in Germany,
ensuring high quality. The 3rd generation brings a lot of new features like USB connection, better controls,
access to four decks, access to four FX slots and much more.
DS3 is the perfect solution if you like to work with samples, loops, hotcues and FX in Traktor Pro 2.
The device has 12 extra large keys with a perfect tactile feeling to fire samples and for convenient access to 8
hotcues and all the transport functions. 4 multifunctional encoders give you a quick control to various deck,
loop and FX parameters. A 2-digit display shows all the values on the device so you don' t have to look at the
screen all the time. You can switch the device to each of the 4 decks by dedicated buttons in a fast way. Last
but not least there are special loop recorder and browser sections. About 1200 assignments gives this little
box an enormous power for your performance. Check it out...
Features
- Special controller for DJ software (optimised for Native Instruments Traktor Pro 2)
- Setup files for Traktor Pro/Duo 2 in version 2.1.1 or higher are shipped with the controller
- USB interface with bus powering - class compliant / no driver necessary, consumption less than 500mW
- Controls up to four decks – easy switching between deck A-B-C-D on the fly
- Supports track deck & sample deck mode with easy switching between the modes
- 4 multifunctional encoders – access to all FX and important deck + loop parameters by 6 group buttons
- Dedicated FX assign buttons for quick switching to the 4 FX busses
- Detailed control of all sample slot parameters by 4 encoders
- Browser section with encoder, view and favorite buttons (with additional tree navigation)
- Loop recorder section with encoder and two buttons (with additional copy function to any sample slots)
- 12 extra large buttons for sample trigger and hotcue access
- All controls with double function by holding down the shift button
- 31 LED's and a 2-digit display to show various informations by feedback data from computer
- About 750 commands – all free to reassign
- Very compact design in a black, plastic casing (desktop format 180x105x70 mm, 350 g)
System requirements
- PC or Mac with a free USB port (1.0 or higher) or any USB hub
- Native Instruments Traktor Pro/Duo 2 (as of version 2.1.1) or software which allows user assignments
of continuous parameters (CC) and note commands.
Advertisement
