Manual Configuration Settings - DIGIWEB Fritz!Box 7430 Quick Start Manual

Manual Configuration Settings

Please note that the Fritz!Box is pre-configured with the correct Digiweb
settings. You should not be required to change these settings. A factory
reset of the Fritz!Box as per page 14 will return the preconfigured settings
at any point. However if configuring an alternate 3rd party VDSL modem,
the following settings are required:
FIBRE VDSL SETTINGS:
• Encapsulation = PPPoE LLC
• ATM Settings = Detect automatically (recommended setting)
• Username
• Password
• VLAN ID
ADSL SETTINGS:
• Encapsulation = PPPoE LLC
• ATM Settings = VPI:8 VCI:35
• Username
• Password
• VLAN ID
12
= digiweb@nga.digiweb.ie
= digiweb
= 10
= digiweb@dsl.digiweb.ie
= digiweb
= not required