Advertisement
Presence
Loudspeakers for
Todays ARCHITECTURE
RISQUE DE CHOC ELETRIQUE
NE PAS OUVRIR
S P E C I F I C A T I O N S
Frequency Response:
Crossover Frequency:
Phase Adjustment:
Amplifier Output Power:
Audio Inputs:
Input Impedance:
Input Power:
Input Power Connection:
Power (Mains) Fuse:
Power Modes:
Auto Off Delay:
Dimensions:
Weight:
Shipping Dimensions:
Shipping Weight:
The A-120 is shipped with adjustable feet, (4 spiked and 4 rubber) with tool-less
knurled jam nuts. These feet can be installed in the bottom of the enclosure in
either a 3-point triangular pattern or more traditional 4-point square pattern.
The bottom of the enclosure has 5 threaded inserts arranged to accept either pattern.
(4) Spiked Feet
!
300 Watt RMS BASH Amplifier
28Hz – 300Hz (System Response)
40Hz – 120Hz (Low-pass filter with bypass switch)
0 – 180 degrees (Continuously variable)
300 watts, with thermal and clipping limiters
Summing stereo line level (RCA x2)
LFE (RCA shared with Left input connector)
Speaker level (Stereo 5-way binding post)
Line Level – 20k ohms, Unbalanced
Speaker Level – 220 ohms
120V 60Hz AC
IEC 2-wire receptacle with integral fuse holder
3A 250V GMA style Fast Blow
Auto signal sensing and always on
~10 minutes
15-3/8
W x 17-5/16
H x 14-3/4
''
''
(390W x 440H x 375D)mm (without feet)
43lbs (19.5kg)
21
''
W x 20
''
H x 20
''
D, (533W x 508H x 508D)mm
51lbs (23.2kg)
(4) Knurled Lock Nuts
D,
''
(4) Rubber Feet
Advertisement
