Certification And Safety Approvals; Fcc Compliance Statement - Sena TUFFTALK User Manual

Type Function Button Command
Press the Phone Button for
FM radio on/off
1 second
Select preset Tap the Phone Button
Rotate the Jog Dial while
Seek stations
pressing
FM Radio
Scan up FM band Double tap the Phone Button
Stop scanning Double tap the Phone Button
Save preset while
Tap the Phone Button
scanning
Press the Phone Button for
10 seconds
Factory reset
Reset
Tap the Jog Dial within 10 seconds
Fault reset Press the Reset Button

CERTIFICATION AND SAFETY APPROVALS

LED Beep
Mid-tone

FCC Compliance Statement

- double
beeps
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
Mid-tone
-
single beep
(1) This device may not cause harmful interference, and
High tone
- (2) This device must accept any interference received, including
triple beeps
interference that may cause undesired operation.
- -
This equipment has been tested and found to comply with the limits for
High tone
a Class B digital device pursuant to part 15 of the FCC rules. These
- double
beeps
limits are designed to provide reasonable protection against harmful
High tone interference in a residential installation. This equipment generates,
- double
uses and can radiate radio frequency energy and, if not installed and
beeps
used in accordance with the instructions, may cause harmful
High tone
interference to radio communications. However, there is no guarantee
Solid red double
beeps that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment on and
- -
off, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antennae
• Increase the separation between the equipment and the receiver
Tufftalk
47