Stereo Music - Sena TUFFTALK User Manual

4. After selecting the last number redial menu, you will hear a voice
prompt, "Last number redial". Then, to redial the last phone call
number, tap the Phone Button or the Jog Dial.
5. To call one of the speed dials, rotate the Jog Dial clockwise or
counter clockwise to navigate between the menus until you hear
a voice prompt, "Speed dial (#)". Then, tap the Phone Button or
the Jog Dial.
6. If you want to exit the speed dial immediately, rotate the Jog Dial
until you hear voice prompt, "Cancel", and tap the Phone Button
or the Jog Dial. If you do not press any button within 15 seconds,
the Tufftalk will exit the voice speed dial menu and go back to
stand-by mode.
Note:
1. Make sure that you connect the mobile phone and the headset to use the
speed dial function.
2. You need to assign speed dial numbers before using the speed dial
(please refer to section 15.1, "Assigning Speed Dial" ).

7 STEREO MUSIC

The Bluetooth audio device must be paired with the Tufftalk by
following the section 5.1, "Mobile Phone Pairing - Mobile Phone,
Bluetooth Stereo Device" procedure. The Tufftalk supports the Audio/
Video Remote Control Profile (AVRCP), so if your Bluetooth audio
device also supports the AVRCP, you can use the Tufftalk to remotely
control music playback. Not only can you adjust the volume but you
can also use functions such as play, pause, next track and previous
track.
1. To play or pause music, press and hold the Jog Dial for 1 second
until you hear a double beep.
Tufftalk
1
21