Chamberlain KPR2000 User Manual page 7

PROGRAMMING
USING MANAGER CARDS
KPR2000 managers can use manager cards to program user cards into
and out of the system. There are two pre-programmed manager cards
(an Add Card, and a Delete Card) to allow rapid card enrollment. This is a
form of Auto User ID enrollment and is only available in "Card Only"
configuration.
ACCESS CONFIGURATION: CARD ONLY
Programming Step Keystroke Combination
Add a User Card
Delete a User Card
7
1. (Read Manager Add Card)
2. (Read User Card)
Repeat Step 2 for additional user cards
3. (Read Manager Add Card)
1. (Read Manager Delete Card)
2. (Read User Card)
Repeat Step 2 for additional user cards
3. (Read Manager Delete Card)