Table of Contents
Advertisement
Time
When you confirm the 12/24HR Display,
the Hours digit will start flashing. Press the
RESET key to increase the digit or press the
MODE key to decrease the digit. Press the
SET key to confirm and move to Minute
settings. Set Minutes using the same
directions. Press the SET key to confirm and
move to Units settings.
Units
You can press the RESET key or MODE key to
toggle Imperial or Metric Units for display.
Press the SET key to confirm and move to
Stride Length settings.
Stride Length
Correct Stride Length is defined from the tip
of one foot to the tip of your other foot. To
measure the correct average stride length,
divide the total distance of ten steps you've
walked or run by the number of steps (10).
Calculate your stride length in the following
way:
You walk 30 feet (total distance) / 10
(number of steps) = 3 feet x 12 inches =
36 inches.
US-7
Advertisement
Table of Contents
