Odo Step Mode; How To Active/Deactivate Odo Step - VITRA VA028 User Manual

ODO Step Mode

Allows you to start a new, separate session
for step counting. The current steps will still
be retained while you monitor your new
session.
How To Activate/Deactivate ODO Step
Mode Function
To activate the ODO function to view your
new session of step counting, press the
MODE key to enter the ODO Step Mode and
you will see ODOSTEP on the top line of the
display. Press and hold the SET key for two
seconds to activate the function and the
"ODO" icon will keep flashing during the
ODO Step Mode.
To end the session, press and hold the SET
key for two seconds to deactivate the
function and the "ODO" icon will stop
flashing.
To clear the ODO step data, press and hold
the RESET button for two seconds. The Step,
Distance and Calorie data in the main Step
mode will remain.
US-10