NEC MultiSync LCD1990SX User Manual page 20

Video Detect
Off Timer
OFF MODE
OFF MODE Setting
Response Improve
Side Border Color
LED Brightness
LED Color
UNIFORMITY
UNIFORMITY Level
Tag8 Language
OSD H. Position
OSD V. Position
OSD Turn off
01_English
Selects the method of video detection when more than one computer is connected.
Press "Left" or "Right" to select.
FIRST: The video input has to be switched to "FIRST" mode. When current video input
signal is not present, then the monitor searches for a video signal from the other video
input port. If the video signal is present in the other port, then the monitor switches the
video source input port to the new found video source automatically. The monitor will not
look for other video signals while the current video source is present.
LAST: The video input has to be switched to the "LAST" mode. When the monitor is
displaying a signal from the current source and a new secondary source is supplied to the
monitor, then the monitor will automatically switch to the new video source. When current
video input signal is not present, then the monitor searches for a video signal from the
other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
NONE: The Monitor will not search the other video input port unless the monitor is
turned on.
Monitor will automatically turn off after the preset time period from power on with the
ON/OFF function. When you select "ON", press "SELECT" and "Left" or "Right" to adjust.
Before powering off, a message will appear on the screen asking the user if they want to
delay the turn off time by 60 minutes. Press any OSD button to delay the turn off time.
OFF Mode allows the monitor to enter into a power saving mode after a period of
inactivity. It has three settings.
OFF: Monitor does not go into power save mode when the input signal is lost.
STANDARD: Monitor enters power save mode automatically when the input signal is lost.
OPTION: Monitor enters power save mode automatically when the amount of surrounding
light goes below the level that is determined by the user.
Adjusts the luminance value for OFF MODE.
Turns the RESPONSE IMPROVE function on or off. Response Improve may reduce
blurring that occurs in some moving images. When Response Improve is on, response
time is improved. When the IMAGE ROTATION function is used, the RESPONSE
IMPROVE function will be turned off automatically.
Adjusts the side black bars colour between black and white. For wide aspect monitors.
Controls the brightness of the LED on the monitor.
The LED on the front can be blue or green.
This function electronically compensates for the slight variations in the white uniformity
level as well as for deviations in colour that may occur throughout the display area of the
screen. These variations are characteristic of LCD panel technology. This function
improves the colour and evens out the luminance uniformity of the display.
NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the
display. If greater luminance is desired over the uniform performance of the display, then
UNIFORMITY should be turned off.
Select the level for UNIFORMITY adjustments.
OSD control menus are available in eight languages. Press "Left" or "Right" to select.
You can choose where you would like the OSD control image to appear on your screen.
Selecting OSD Location allows you to manually adjust the position of the OSD control
menu left or right.
You can choose where you would like the OSD control image to appear on your screen.
Selecting OSD Location allows you to manually adjust the position of the OSD control
menu up or down.
The OSD control menu will stay on as long as it is use. You can select how long the
monitor waits after the last touch of a button to shut off the OSD control menu.
The preset choices are 10-120 seconds by 5 seconds step.
16
English-16
18/6/07, 10:57 AM