Configuring The Media Control Server On The Host Pc - Nuvo Music Port NV-MP Installation Manual

V. Configuring the Media Control Server on the Host PC
Once the Media Control Server (MCS) is installed, it can be accessed by going to Start-
>All Programs->Autonomic Controls->Media Control Server->MCS Configuration.
Control Server Tab (Fig. 9)
The Control Server tab displays the status of the MCS. The Media Control Server status
in the upper right hand side of the tab should indicate that the MCS is running. It is
rare that any changes will have to be made to the settings in this tab. If changes are
necessary, see section VI. Advanced Server Configuration, pg. 17.
Figure 9 – Control Server Tab
10