Nuvo Music Port NV-MP Installation Manual page 38

Nuvo technologies inc. music port installation guide
Table of Contents

Advertisement

Figure 35 - Music Port Client Alphabet Search
Managing the Queue
The Music Port Client is based on a music queue system. When a listening choice is
made it is automatically placed in a temporary playlist. You can view the current list by
clicking on the Queue button to the left of the Client interface. If you want a selection
to begin immediately playing, click and hold for approximately three seconds. Moving
spectrum analyzer bars indicate the choice that is currently playing.
Zones (Fig. 36)
The "Zones" tab allows access to the NuVo System zones through the "RS232" port on
the Music Port box and the DB9 input on the NuVo System. These correspond to the
zone addresses assigned to each Control Pad. This is best accomplished through the
I8G and E6G Configurator software. There you can give names for each assigned zones
which are provided to NuVoNet when the configuration is downloaded to the system.
Clicking on a zone changes the selected listening zone, and clicking on the All Zones
Off button turns all the system's zones off simultaneously. Clicking on the Party Mode
button on the "Now Playing" window turns all the zones on simultaneously and makes
the Music Port Client the master controller for the home.
36

Advertisement

Table of Contents
loading

Related Products for Nuvo Music Port NV-MP

Table of Contents