Advertisement
breaker is tripped, remove sufficient current load to reduce the total to
no more than 15 amps, wait approximately 30 seconds after the trip-
ping, turn off the main power switch and push in the circuit breaker
button.
2. The ground lift switches have no effect on the ground loop
noise.
a. Check if the equipment powered by the Rackpower 320 is
connected with a grounded (3-prong) plug. The ground
lift switches can have no effect on equipment which
b. Examine the source of the noise. If the noise is not a very
low frequency, 60 cycle hum, lifting the grounds will
have no effect. Research other solutions.
If an observed problem is not listed here, if it can not be remedied and
particularly if the problem seems severe or dangerous, discontinue use
of the Rackpower 320 and contact Juice Goose directly.
REPAIR
Should your Rackpower 320 need service contact Juice Goose of as-
sistance and authorization to return the unit. PLEASE NOTE: a return
authorization number is required in order for the service personnel to
correctly and promptly identify, repair and return your unit.
You may obtain a Return Authorization Number by calling: 713-772-
1404 or sending email to info@juicegoose.com.
does not use a third wire grounding connection.
Advertisement
