Download Print this page

JUICE GOOSE Rackpower 320 Owner's Manual

Ground loop control system

Advertisement

Quick Links

OWNERS MANUAL
PROFESSIONAL POWER PRODUCTS
RACKPOWER 320
GROUND LOOP CONTROL
SYSTEM
JUICE GOOSE
7320 Ashcroft, Suite 104
Houston, Texas 77081
p: 713-772-1404
f: 713-772-7360
e: info@juicegoose.com
www.juicegoose.com
03-01

Advertisement

loading

Summary of Contents for JUICE GOOSE Rackpower 320

  • Page 1 OWNERS MANUAL PROFESSIONAL POWER PRODUCTS RACKPOWER 320 GROUND LOOP CONTROL SYSTEM JUICE GOOSE 7320 Ashcroft, Suite 104 Houston, Texas 77081 p: 713-772-1404 f: 713-772-7360 e: info@juicegoose.com www.juicegoose.com 03-01...
  • Page 2: Specifications

    Juice Goose shall under no circumstances be held responsible for any loss, damage or in- jury resulting from the use of the Rackpower 320 in a manner inconsistent with any of the procedures outlined in this document. The user is responsible for determining whether this product is appropriate for the intended application.
  • Page 3: Front Panel

    FRONT PANEL Power On/Off Switch – This lighted rocker switch is located on the left hand side of the chassis. The switch will light when the Rackpower 320 is Ground Control Switches – Ten switches, each on controls the grounding lead to a single electrical outlet on the back of the unit.
  • Page 4: Power Cord

    If the breaker trips check for a malfunction in equipment plugged into the Rackpower 320. Also check to be certain the total current requirement of the equipment plugged into the Rackpower 320 does not ex- ceed 15 amps.
  • Page 5: Troubleshooting

    “Ground” position. If the hum returns after grounding a particular outlet that outlet should be relifted. Note that if equipment is connected to the Rackpower 320 by a power cord that does not have a 3rd pin ground, lifting the ground to that outlet will have no effect.
  • Page 6 2. The ground lift switches have no effect on the ground loop noise. a. Check if the equipment powered by the Rackpower 320 is connected with a grounded (3-prong) plug. The ground lift switches can have no effect on equipment which does not use a third wire grounding connection.