Home Theater Audio Connections - Pioneer DV-7474 Operating Instructions Manual

Connecting Up
2

Home theater audio connections

This player outputs multi-channel audio in both analog
and digital form. Check the manual for your amplifier/
receiver to see what equipment it is compatible with
(especially which digital formats—Dolby Digital, DTS,
etc.—it can decode).
1
If your amplifier has stereo inputs only,
connect them here.
3
Connect to the coaxial or optical input of your amplifier,
if it has digital inputs.
Connecting analog audio cables
Be sure to fully insert each plug for the best connection.
The plugs and jacks are colour-coded to make connection
easier.
Connecting optical cables
Optical interconnects only plug in
one way, so make sure the plug is
correctly lined up with the jack
before inserting. You should hear it
click into position when fully
inserted. When inserting the plug,
the protective shutter will open and you should hear it
click into position when fully inserted. Be careful that
you do not force the plug, because this could result
in damage to the
protective shutter, the cable, or the unit itself.
32
En
2
AV CONNECTOR 2 AV CONNECTOR 1 (RGB)-TV
1 2
COMPONENT VIDEO OUT
1 1 L
Y P B P R
R
2 2
S-VIDEO VIDEO AUDIO OUT
OUT OUT (2CH)
Important
Before making or changing any rear panel connections, make sure
that all components are switched off and unplugged from the wall
outlet.
If your amplifier has 5.1 channel analog inputs,
connect them here.
Connect to the FRONT L(left)/R (right), SORROUND
L/R, CENTER and SUBWOOFER inputs of your
amplifier.
CENTER
L
IN
OUT
R
CONTROL
OPTICAL COAXIAL
SUB
FRONT SURROUND WOOFER
DIGITAL OUT
AUDIO OUT
(5.1CH)
4
Plug into a standard AC wall outlet.
Connecting coaxial cables
Use an interconnect with a pin-type
(also called RCA or phono) plug on
each end to connect up digital
coaxial-type jacks. Make sure that
the plug is pushed fully home.
Note
If you listen to multichannel DVD-Audio through one of the
digital outputs, it will be downmixed to stereo. Also, high
sampling rate DVD-Audio (192kHz or 176.4kHz) will be
downsampled to 96kHz, 88.2kHz, 48kHz or 44.1kHz,
depending on the disc. Multi channel and high sampling rate
DVD-Audio is only available through the analog outputs.
Some DVD-Audio and all SACD audio is output only through
the analog outputs.
AC IN
C O A X