Warranty; Accessories And Spare Parts En - Vetter MPS 2.0 MWF Operating Instructions Manual

Suction turbine does not run
 Check the receptacle and the fuse of
the power supply.
 Check the power cable and the power
plug of the device.
 Press the switch on button of the pro-
tection switch.
 Turn on the appliance.
 Check the swimmer.
Suction turbine turns off
 Switch on the disposal pump.
Suction capacity decreases
 Remove obstructions from the suction
nozzle, suction tube, suction hose, or
coarse dirt filter/flat-fold filter.
 Replace the paper filter bag (optional).
 Ensure the filter cover properly locks
into place.
 Replace the flat pleated filter.
 Check for proper installation of the flat
pleated filter.
 Check the proper installation of the
coarse dirt filter.
Dust escapes during dry vacuuming
 Install the flat fold filter.
 Check for proper installation of the flat
pleated filter.
 Replace the flat pleated filter.
Disposal pump is not running
 Check the socket of the appliance.
 Free the stuck floater switch in the con-
tainer.
 Release the stuck pump impeller in the
pump.
Disposal pump does not produce
much volume
 Route the disposal hose without kinks.
 Check the disposal hose for obstruc-
tions.
16
For this purpose, download our general
–
terms and conditions from our website:
www.vetter.de
In the event of a warranty claim, please
–
contact your distributor or the Vetter
GmbH, 53909 Zülpich presenting your
proof of purchase.
Accessories and Spare Parts
Only use accessories and spare parts
–
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
At the end of the operating instructions
–
you will find a selected list of spare parts
that are often required.
For questions concerning spare parts,
–
please contact:
Vetter GmbH
Blatzheimer Str. 10 - 12
53909 Zülpich
Tel. Germany: +49 (0) 2252/300850
Tel. international: +49 (0) 2252/300860
– 5
EN

Warranty