Table of Contents
Advertisement
SPECIFICATIONS
Output power:
Input sensitivity:
Input impedance:
Channel separation:
Frequency response:
S/N ratio (JISA weighted):
THD:
Damping factor:
Dimensions:
Weight:
AC power requirement idle/max
(4 Ohm Load):
Mains voltage:
Notes on protection circuits:
These amplifiers are equipped with different protection circuits to prevent any damage to the amplifier
itself or the speakers due to improper operation circumstances.
1. Overheat- For low mechanical noise emission, the built-in fan operates at low speed as long as
the internal heat sink keeps cooler than 55 degrees Celsius. The fan will speed up to maximum
speed when this temperature is exceeded. When the heat sink temperature exceeds 90 degrees
Celsius, the amplifier will shut down the outputs to avoid overheating. The outputs will be
automatically re-activated when the heat sink comes below 70 degrees Celsius.
2. DC on output- When DC is detected on the output, the amplifier will shut down the outputs to
avoid speaker damage.
3. Short circuit on the output- When a short circuit is detected on the output, the amplifier will shut
down the outputs to avoid damage to itself.
©2000 Numark Industries
NPA3300:2x150W@4 ohm, 2x100W@8 ohm, 1x280W@8ohm bridged
NPA6600:2x300W@4 ohm, 2x200W@8 ohm, 1x480W@8 ohm bridged
NPA3300 < 900mV
NPA6600 < 1200mV
22kOhm (unsym) - 33kOhm (sym)
>70dB@1kHz
10Hz ... 100kHz
NPA3300: 115dB
NPA6600: 117dB
<0.1% at rated power
100@8Ohm
482mmx 88mmx 450mm including handles
NPA3300: 15.5kg
NPA6600: 21.kg
NPA3300: 45/530W
NPA6600: 55/1040W
230V/50Hz AC
- The Leader in DJ Technology
- 7 -
NPA3300-NPA6600
http://www.numark.com
Advertisement
Table of Contents
