Advertisement
Note: At OPX telephones, when you see "Hookflash" press the hookswitch for
1/2 second and release.
PLACING AND ANSWERING CALLS
Placing outside call:
Placing Intercom call:
Answering any call:
Answering ringing over
page speaker:
Answering a
co-worker's call:
HOLD AND TRANSFER (for outside calls only)
Placing call on Hold:
Transfering a call:
Retrieving held or
Transferred call:
RESPONDING TO SIGNAL TONES
Two tones during a call:
Fast busy/warble tone:
CONFERENCE
Setting up a multiple
party call:
CALL FORWARDING
Forwarding to an
extension:
Canceling:
USING BASIC FUNCTIONS
Lift handset + Dial line code + Dial number
Lift handset + Dial extension. If you hear ring-busy or
busy, you can:
•
Dial 1 to get through (ring busy only)
•
Dial 2 to wait off-hook, then hang up for callback
•
Dial 6 to leave Message Waiting indication
Lift handset. If call is announced over the speaker (ESL),
you can just speak towards the phone.
Lift handset + Dial * 0
Lift handset + Dial * + Dial ringing extension
HOLD (Hookflash at OPX) + Hang up
TRF (Hookflash at OPX) + Dial extension + Hang up
Lift handset + HLD (Dial * 7 at OPX)
A call is waiting to be answered. To answer: HLD
(Hookflash at OPX) + Dial * C
To alternate between calls: HLD (Hookflash at OPX) + Dial * S
You made a mistake using your phone. Hang up and try again.
Establish call + HLD (Hookflash at OPX) + Establish call
+ HLD (Hookflash at OPX) + Dial * #
Lift handset + Dial # + Dial ext. to receive calls + Dial
code + Hang up. Codes are: 1=Unanswered calls,
2=When busy or for unanswered calls, 3=All calls. At
ESL, the Message Waiting LED flashes.
Lift handset + Dial # + Hang up
Advertisement
