Features - Sony VPL-FE110U Operating Instructions Manual

Features

High brightness, high picture quality
• High brightness
Adopting four newly developed 120 W UHP lamps
and a LCD panel with micro lens provides high
brightness (light output 4,000 of ANSI lumen) and
excellent uniformity on the picture.
• High resolution
Thanks to use of three 1.8-inch SXGA
approximately 1,300,000 pixels, the projector can
project the sharp picture with the resolution of 1280 ×
1024 pixels.
• DRC (Digital Reality Creation)
The DRC technology allows you to obtain a finer,
more detailed picture with four-times higher density
than the conventional video picture.
Accepts various input signals
This projector has a built-in high performance scan
converter which converts the input signals to display
the 15 k RGB, DTV, HDTV, VGA
SXGA 1) and UXGA 1) (fV = up to 75 Hz) signals as
well as the video signals of the composite, S video and
component.
The projector accepts a wide range of HDTV/DTV
signals as shown in the chart below.
Format Scanning Frame
rate (kHz) rate (Hz)*
1035/60i 33.75 30
33.75 30
1080/60i
480/60P 31.5 60
575/50P 31.25 50
27 24
1080/24P F
S
28.13 25
1080/50i
720/60P 45 60
720/50P 37.5 60
* Each of the frame rates is also compatible with 1/1.001.
System expandability and versatility
The projector has RS-232C/422A/PJ COM interface
connectors for communication.
..........................................................................................................................................................................................................
1) VGA, SVGA, XGA, SXGA and UXGA are the registered trademarks of the International Business Machines Corporation,
U.S.A.
2) Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
1)
panels with
1) 1) 1)
, SVGA , XGA
Scanning Aspect Standard
format ratio
2:1 interlace 16:9 BTA S-001B
2:1 interlace 16:9 SMPTE 274M/
BTA S-001B
Progressive 16:9/4:3 SMPTE 293M
Progressive 16:9/4:3 –
2:1 interlace 16:9 –
2:1 interlace 16:9 SMPTE 274M
Progressive 16:9 SMPTE 293M
Progressive 16:9 –
By combining the interface boards and signal interface
switcher (not supplied), VPL-FE110U/FE110M
projection systems can be greatly expanded. This
projector also has the group and device index functions
for using multiple projectors in one system.
Easy and flexible setup
• Easy setup with external equipment
This projector has 48 preset data for input signals in
the memory. You can get a picture properly on the
screen by connecting equipment and pressing Sony's
original APA (Auto Pixel Alignment) key.
• Flexible setup
The lens shift function allows you to install the
projector in a wide range of locations, without
worrying about keystone distortion (the picture going
out of square). The power focus and power zoom
functions also let you change the size of the projection
screen without having to move the projector.
• Stack installation
Thanks to the lens shift function, up to three projectors
,
can be stacked, which improves the brightness of the
image.
• Fail safe function
The projector uses four lamps for light source. Even if
one of them has burnt out, you can still use the
projector. If two lamps have burnt out, the projector
will automatically enter into standby mode.
Selectable four lamps or two lamps
You can select four lamps for high brightness or two
lamps for the long lamp lives. (For setting the lamp
mode, consult with qualified Sony service personnel.)
Convenient network function
As the Microsoft 2) Windows
projector, you can connect the projector to LAN using
an optional LAN/wireless LAN PC card.
2) CE is built in the
7