Connecting To Lan - Sony VPL-FE110U Operating Instructions Manual

Connecting to LAN

Installing a PC card
When you use the LAN PC card, wireless LAN PC card
or memory card, insert the card into the PC card slot of
INPUT C of the projector and set the INPUT C/RS-
232C/RS-422A select switch to INPUT C.
When the PC card is inserted into the slot, the eject
button pops out.
To remove the PC card from the slot, press the eject button.
Notes
• For details of the recommended PC card or wireless
LAN access point, see the attached "Recommended
PC card/wireless LAN access point."
• When you use LAN , you must set the IP address.
For details of setting IP address, etc,. see the attached
"Operating Instructions for Networking."
Connection of LAN PC card
to router
Computer
This section describes how to connect the LAN PC card or wireless LAN
PC card and install the memory card. For details on how to connect other
equipment, see pages 21 and 32 to 34. Also refer to the instruction
manuals of the equipment to be connected.
LAN PC card
(NE2000 compatible)
Hub
(recommended)
Noise prevention
core (see page 20.)
LAN cable
Set to INPUT C.
Computer
Before inserting the PC card or
memory card, remove the protect
card from the slot.
to the PC card slot of
INPUT C
PC card
Insert the card with the arrow
mark facing torward the slot.
Eject button
INPUT C INPUT B INPUT A VIDEO
+
–
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX KEYBOARD MOUSE
0 0
PS/2
Computer
IN PU T
C
IN PU T
B
IN PU T
A
PC CA
RD
Rear
PS/2
Mouse
Keyboard
19