Face Panel; Front Panel Features - Numark CDN 36 Owner's Manual

CDN 36

FRONT PANEL FEATURES

1. Open/Close: Press to load or eject the disc. The tray will not open if a disc is in play. The tray door will
automatically close in 30 seconds if left open. This is to protect the tray from accidental damage while open.
2. Single: Allows the unit to play back just one track at a time (single) or play continuously through all tracks and
then start over repeating the CD infinitely (continuous).
3. Time: Switches the time modes on the display between elapsed playing time, remaining time on the track, and
remaining time on the total CD. When toggled to remaining time total the total number of remaining tracks will
also show.
4. LCD Display: Indicates all the functions, as they are occurring, with the CD.
5. Track Knob: Rotate this knob to select tracks.
6. Program: Depress this button, the unit will stop and the program indicator will light. Select each track to be
programmed and press the PROGRAM button between selections. You can program up to 30 tracks. Press PLAY
to start the program. To exit and erase program hold the program button down for more than 2 seconds while
the unit is stopped, open the disc tray, or turn off the power.
7. Search Knob: Pressing the track knob allows you to use the jog wheel and rapidly scan the music to find a cue
point. The search function automatically shuts off after 8 seconds of non-use or you may toggle it off.
8. LOOP IN - Used for setting a start loop point and new cue points during play.
9. LOOP OUT - Used for setting the end loop point and releasing the loop action.
10. RELOOP/STUTTER - Depending on mode, as explained further, this button is used for either repeating a
previously set loop or seamlessly stuttering on the last set cue point.
11. Cue: Returns and pauses the music at the last set cue point.
play is pressed. The cue point is set as the initial start point on a track or can be moved when play is started at a
different point. For instance if the music is paused then play is pressed a new cue point is set. You can easily
edit the cue point by turning the wheel during pause. As you rotate the wheel the music will sound. By stopping
the wheel and pressing play a new point is set.
the CD to be played from the same position any number of times.
Note: Pressing cue 2 times plays music temporarily from this point until the button is released.
12. Play/Pause: Starts the music from the cue point or pauses it while in play.
cue point will be set
©2002 Numark Industries
The cue point is where the music will begin when
Alternately pressing the PLAY button and the CUE button allows
- The Leader in DJ Technology
- 6 -
By pressing play after pause a new
http://www.numark.com