When installing:
Ensure that you route the cables firmly and tape up in the proper positions.
Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
1170 Clickpad
For access, remove these FRUs:
•
"1010 Base cover" on page 57
•
"1070 Battery pack" on page 63
Removal steps of the clickpad
Step
Screw (quantity)
3
M2 × 2 mm, flat-head, nylon-coated (5)
When installing:
Ensure that the connector is attached firmly.
80
Hardware Maintenance Manual
3
3
3
3
3
1
Torque
Color
Black
0.181 Nm
(1.85 kgf-cm)