Parts Breakdown - Nostalgia Electrics Margatartor MSB-64 Instructions Manual

ENGLISH
PRE-USE PREPARATION AND ASSEMBLY (Continued)

PARTS BREAKDOWN

A
C
After cleaning all parts, attach the Blending Chamber to the Motor Base. Place the
Blending Chamber on top of the Motor Base in a slightly ajar fashion so the Blending
Chamber slides down into the Motor Base (as shown below). Next, simply twist the
Blending Chamber counter-clockwise so it firmly locks into position. Once this is
done, the Blending Chamber should look perfectly aligned with the Motor Base.
You are now ready to begin using your 64 OUNCE MARGARATOR!
3
A. Blending Chamber
B. Motor Base
C. Lid
D. Drip Tray
Figure A
B
D