Getting Started-Mac - j5 create JUC400 User Manual

WORMHOLE SWITCH

GETTING STARTED-MAC

Follow the steps below to start the Wormhole application:
1. Connect one end of the Wormhole Switch to a standard USB
port on one of the two computers. And connect the other end of
the Wormhole Switch to a USB port on the second computer.
(Please see the pictures below)
2. When you initially connect the Wormhole Switch to the MAC
computer a window will pop up that says, "Keyboard Setup
Assistant", simply close the window and unplug the Wormhole Switch.
Then plug the Wormhole Switch back into your MAC computer.
USER MANUAL
10