Turn Off The 8000I; The Keys On The 15 Inch Monitor - NorthStar 8000i System Operation Manual

2.2

Turn off the 8000i

To turn off the 8000i using a 12" Display Processor:
1. Hold down the Power key. The Northstar 8000i countdown screen
To turn off the 8000i using a 15" Monitor (preferred method):
Use this method when the Black Box Processor and the 15" Monitor are both wired
together as recommended in the 15'' Installation Manual.
1. Hold down the Power key on the 15" Monitor for about three seconds
To turn off the 8000i using a 15" Monitor (alternative method):
Use this method when the Black Box Processor and the 15" Monitor are wired
independently.
1. Hold down the Power key on the 15" Monitor for about three seconds
2. Hold down the Power (ON/OFF) key at the back of the Black Box
2.3

The keys on the 15 inch Monitor

The "keys" are physical keys that you can depress. The following keys are shown on
your 15" Monitor:
Key
A Power
B Up Arrow
C Down
Arrow
appears, then the 12" Display Processor turns off automatically. (If you
want to cancel shutdown, just release the button.)
to turn off the 8000i.
to turn off the 15" Monitor.
Processor until the red Power LED goes out.
Function when NOT in
OSD mode
Press once to turn on. Hold down for three seconds to turn off.
If correctly wired using the Remote Power On feature this key also
controls the power status of the Northstar 8000i Black Box Processor
Press to step up through the
other video input source options.
Press to show the current video
input source in the top left corner
of the screen.
Press again to step down through
the other video input source
options.
Northstar 8000i Operation Manual
Function in OSD mode
Press once to step up through
the OSD options.
Press once to step down through
the OSD options.
19