Preface - NorthStar 2 kW Installation Manual

1

Preface

This manual explains how to install the scanner and the radar processor. It also explains how to set up
the radar system after installation and gives information on troubleshooting.
This manual is supplementary to Revision C and Revision D of the
Navigation System Installation Manual Part Number GM6KIM
If the radar will be used with a Northstar 8000i system, this manual should be used with the Northstar
8000i System installation documentation for your display processor.
This manual is written for professional marine technicians, installation technicians, and service
technicians, and can be used for information by dealers.
PLEASE READ CAREFULLY BEFORE USE
Ensure that mains power is OFF before starting installation or servicing work. Electrical shock, fire or injury can
result if electrical power remains ON, or is switched ON, during installation or servicing work.
A potentially lethal high voltage is present and can remain for a period of time after the equipment is turned OFF.
Ensure that capacitors are discharged with an Earthed wire before starting servicing work.
To minimize accidents, wear dry cotton gloves and avoid touching equipment with both hands unless absolutely
necessary. Always work from a stable position to avoid slipping or falling onto the equipment.
The skipper must make final decisions based on all of the information sources to hand
6
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
Ensure that internal surfaces are no longer charged before you touch them.
The radar is intended ONLY as an aid to navigation.
and must not rely solely on the radar.
Northstar 6100i Networked
.
Northstar 2 kW Radar Installation Manual