Table of Contents
Advertisement
4.3
Run the 2 kW interconnection cable (NS003100/NS003101) to the
radar processor
Run the 2 kW interconnection cable (NS003100/NS003101) from the scanner to the radar processor.
Push the round connector (A) of the 2 kW interconnection cable into the scanner connection on the
radar processor and tighten the locking nut.
The interconnection cable pin details are provided here for information, in case the connector needs
to be removed to feed the cable, or in case the cable needs to be shortened.
The front view of the 2 kW interconnection cable is shown above.
2 kW interconnection cable pin details
Pin
Color
1
Green (big)
2
Yellow (big)
3
Green (thin)
4
Clear Coax signal
5
Drain wire for 4
6
Drain wire for 7
7
Black Coax signal
8
White
9
Yellow
10
White (big)
Shell
Braid shield
Northstar 2 kW Radar Installation Manual
Signal name
AWG size
Power
#12
Power GND
#12
Pulse width
#24
Video
#24
Video GND
#24
Trig GND
#24
Trig/STC
#24
BZ Tune to
#24
scanner
Tune from
#24
scanner
No connection
#12
25
Advertisement
Table of Contents
