Receiver - Samsung H32B User Manual

6
System
If you have selected an Anynet+ device by pressing the
its input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the

6.11.3 Receiver

You can listen to sound through a
To listen to sound through a receiver, go to
Receiver). Then select
If your Receiver
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
Device List.
Receiver (i.e. Home Theatre) instead of the product Speaker.
Receiver
Receiver and set to On.
supports audio only, it may not appear in the device list.
Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
You can connect only one receiver (home theatre).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable
connections.
Check whether
setup menu.
Check whether the remote control is Anynet+ compatible.
If you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your product off
and on again.
Check if the Anynet+ function of the Anynet device is set on.
Check if the Anynet+ device is properly connected to the product
and check if the
Anynet+ Setup menu.
Press the TOOLS
a menu you want.
Select View PC
Press the SOURCE
select a non- Anynet+ device.
SOURCE button and then selecting
screen (System Anynet+ (HDMI-CEC)
Possible Solution
Anynet+ (HDMI-CEC) is set to
Anynet+ (HDMI-CEC) is set to
button to display the Anynet+ menu and select
in the Anynet+ menu.
button on the product remote control and
On in the Anynet+
On in the
84
6 System