Divx® Video On Demand - Samsung H32B User Manual

6
System
Problem
The message "Connecting to
Anynet+ device..." appears on
the screen.
The connected device is not
displayed.
6.12 DivX® Video On Demand
O
m
MENU [
Shows the registration code authorized for the product. If you connect to the DivX web site and register
using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit "http://vod.divx.com".
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
Use the remote control after the product has completed Anynet+
configuration or has finished switching to Anynet+.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether
setup menu.
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. Make sure the device is
connected to your product with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.
If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat
the device scan.
] System DivX® Video On Demand
Possible Solution
Anynet+ (HDMI-CEC) is set to
[ ]
ENTER
On in the Anynet+
85
6 System