Setting The Temperature Alarm - NorthStar Echo Sounder 491 Operation Manual

Echo sounder
Hide thumbs Also See for Echo Sounder NorthStar 491:
Table of Contents

Advertisement

Turning the bottom
alarm on and off
The alarm

Setting the temperature alarm

This alarm isn't present
unless a temperature
sensor is installed and
configured.
Page 60
To turn the alarm on, at the BOTTOM ALARM window, press
TURN ALARM ON. To turn the alarm off, press TURN ALARM
OFF.
When the bottom is detected, the alert tone sounds and the
message "Bottom Collision!" is displayed. This message clears
automatically after 20 seconds, and the alarm is reset.
When the temperature alarm is set, an alarm sounds if the
echo sounder detects that the water temperature has either
risen above or dropped below the limit you've set.
To set the temperature alarm:
1. At the ECHO screen, press MORE.
2. Press ALARM.
3. At the ALARM screen, press TEMP ALARM.
The options on the TEMPERATURE ALARM window are
on/off, upper and lower limits, and inside or outside limits.
Temperature alarm window
491 Echo Sounder Operations Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

491 echosounder

Table of Contents