Work Area - Northern Industrial BLACK NICKEL AIR IMPACT WRENCH Owner's Manual

Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product! For
future reference, please complete the owner's record below:
Model: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment cannot be
responsible for issues arising from modification. We strongly recommend this machine is not
modified and/or used for any application other than that for which it was designed. If you have
any questions relative to a particular application, DO NOT use the machine until you have first
contacted Northern Tool + Equipment to determine if it can or should be performed on the
product.
For technical questions please call 1-800-222-5381.
Technical Specifications
Item
Square Drive
Free Speed
Max. Torque
Air Consumption
Air Inlet Diameter
Min. Hose Size
Max. air pressure
WARNING:
below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your pneumatic tool.
WARNING:
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.

WORK AREA

Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause
accidents.
Do not use your tool where there is a risk of causing a fire or an explosion; e.g. in the
presence of flammable liquids, gasses, or dust. Power tools create sparks, which may ignite the
dust or fumes. Do not expose air tools to rain or wet conditions.
Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control, so visitors should remain at a safe distance from the work area.
Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in
your work area, particularly those hazards below the work surface hidden from the operator's
view that may be unintentionally contacted and may cause personal harm or property damage.
3/8"
13,000 RPM
85 ft.-lbs.
5.5 CFM
1/4"- 18NPT
3/8"
90 PSI
Read and understand all instructions. Failure to follow all instructions listed
The warnings, cautions, and instructions discussed in this instruction
SAVE THESE INSTRUCTIONS
Purchase Date: _______________
Description
Page 2 of 8