Item
Sets the function to be accessed by custom key 1.
Custom Key
1
Sets the function to be accessed by custom key 2.
Custom Key
2
Sets the function to be accessed by custom key 3.
Custom Key
3
Allows the monitor settings to be set through the software
DDC/CI
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
When this function is activated, DP port will be in the
DP Auto
Switch
input auto select loop. Otherwise, DP can only be selected
by input select or by hot key.
When this function is activated, HDMI port will be in the
HDMI Auto
input auto select loop. Otherwise, HDMI can only be
Switch
selected by input select or by hot key.
Sets the time to power off the monitor automatically in
Auto Power
Off
power saving mode.
Function
Range
•
Picture Mode
•
CAD / CAM
•
Animation
•
Low Blue Light
•
Display Mode
•
Brightness
•
Contrast
•
Auto
Adjustment
(for models with
D-Sub inputs)
•
Volume
•
Mute
•
Input
•
Eye Protect
•
Eye Protect
Meter
•
ECO Sensor
•
ECO Sensor
Meter
•
Smart
Reminder
•
ON
•
OFF
•
ON
•
OFF
•
ON
•
OFF
•
OFF
•
10min.
•
20min.
•
30min.
Navigating the main menu
45